Student’s 1-seater set with polyurethane edge

Set of 1-seat student table No.3-6 + sled chair on round pipe.

Table dimensions: 700x500x640-700-760 mm.

Frame – round metal pipe, coating applied by powder polymer material spraying. Radius tabletop with cutout on student’s side and rounded corners, made of 16 mm thick laminated chipboard, PVC – 1 mm.

The frame has height group markings when adjusting the table height. The end of the work surface on the student’s side is made of polyurethane at least 20 mm thick, containing an integrally molded limiter that repeats the radius of the tabletop.

The tabletop can be adjusted in three positions at angles of 0, 7, 16 degrees.

Chipboard color: beech, milky oak, ash

Frame color: olive (RAL6021), gray (RAL7035), yellow (RAL1023), blue (RAL5012)

Chair dimensions: 385x475x680-720-760-800 mm, h=340-380-420-460 mm.

Backrest size: 170×380 mm.
Seat size: 380×380 mm.

The seat and backrest are made of bent glued plywood (8-9 mm thick) and coated with clear varnish. The seat and backrest corners and the front edge of the seat are rounded to prevent injury. The backrest and seat are attached to the metal frame with screws and nuts. Chair height adjustment is done with screws through holes in the frame and leg, between which a plastic transition bushing is installed. Plastic caps are fastened to the ends of the frame to prevent student injury and floor damage. The frame has height group markings when adjusting the chair height.

Frame color: olive (RAL6021), gray (RAL7035), yellow (RAL1023), blue (RAL5012)