The set of a table-desk with a drawer is antiscoliosis adjustable in height

Set of 1-seat student table with drawer No.3-6 + chair on round pipe.

Table dimensions: 700x550x580-640-700-760 mm.

Frame – round metal pipe, coating applied by powder polymer material spraying. The tabletop consists of two panel elements (a horizontal element and an element that can be installed in two positions using a special support: horizontally and at a 7° angle).

The support is made of plywood at least 10 mm thick, has sanded corners and is coated with water-based clear varnish. The lid can take a fixed position providing access to the under-table drawer shelf. The bottom of the drawer is made of chipboard. The horizontal lid element has a hole for a cup and pencil case. The movable tabletop element on the student’s side has a special antiscoliotic cutout.

The underframe consists of a front vertical panel and a drawer-shelf. A hook is attached to the side rack of the drawer.

Chipboard color: beech, milky oak, ash

Frame color: olive (RAL6021), gray (RAL7035), yellow (RAL1023), blue (RAL5012)

Chair dimensions: 390x445x680-720-760-800 mm.

Backrest size: 170×380 mm.
Seat size: 380×380 mm.

The seat and backrest are made of bent glued plywood (8-9 mm thick) and coated with powder paint. The seat and backrest corners and front edge of the seat have a rounding radius to prevent injury.

The backrest and seat are attached to the metal frame with screws and nuts. Chair height adjustment is done with screws through holes in the frame and leg, between which a plastic transition bushing is installed.

Plastic caps are fastened to the ends of the frame to prevent student injury and floor damage. The frame has height group markings when adjusting the chair height.

Frame color: olive (RAL6021), gray (RAL7035), yellow (RAL1023), blue (RAL5012)